Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6122A641ER-G
Tingnan ang Detalye DataSheets

XC6122A641ER-G

Product Overview

Category

XC6122A641ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High accuracy
  • Wide input voltage range

Package

XC6122A641ER-G comes in a small SOT-23-5 package.

Essence

The essence of XC6122A641ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels containing 3000 units.

Specifications

  • Input Voltage Range: 1.8V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

XC6122A641ER-G has five pins arranged as follows:

```

| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: VOUT (Output Voltage) Pin 4: NC (No Connection) Pin 5: EN (Enable)

Functional Features

  • Low dropout voltage
  • Built-in overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Reverse current protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Low power consumption
  • Wide input voltage range
  • Excellent voltage regulation

Disadvantages

  • Limited output current capacity
  • No adjustable output voltage

Working Principles

XC6122A641ER-G operates based on the principle of a linear voltage regulator. It uses a reference voltage and feedback mechanism to maintain a stable output voltage regardless of input voltage fluctuations.

Detailed Application Field Plans

XC6122A641ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A641ER-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6122A641ER-G is a compact and efficient voltage regulator with excellent voltage regulation characteristics. Its wide input voltage range and low power consumption make it suitable for various electronic applications. However, its limited output current capacity and fixed output voltage may restrict its use in certain scenarios.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6122A641ER-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6122A641ER-G in technical solutions:

  1. Question: What is XC6122A641ER-G?
    - Answer: XC6122A641ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6122A641ER-G?
    - Answer: The operating voltage range of XC6122A641ER-G is typically between 0.6V and 6.0V.

  3. Question: How does XC6122A641ER-G detect voltage levels?
    - Answer: XC6122A641ER-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

  4. Question: What is the output type of XC6122A641ER-G?
    - Answer: XC6122A641ER-G has an open-drain output, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic high output.

  5. Question: What is the typical quiescent current consumption of XC6122A641ER-G?
    - Answer: The typical quiescent current consumption of XC6122A641ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6122A641ER-G be used for overvoltage detection?
    - Answer: No, XC6122A641ER-G is specifically designed for undervoltage detection. It triggers an output signal when the voltage falls below the threshold, not when it exceeds a certain level.

  7. Question: What is the typical hysteresis voltage of XC6122A641ER-G?
    - Answer: The typical hysteresis voltage of XC6122A641ER-G is around 0.1V. This helps to prevent oscillation and provide a stable output signal.

  8. Question: Can XC6122A641ER-G be used in automotive applications?
    - Answer: Yes, XC6122A641ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6122A641ER-G have any built-in delay or time delay functions?
    - Answer: No, XC6122A641ER-G does not have any built-in delay or time delay functions. It provides an immediate output signal when the voltage drops below the threshold.

  10. Question: What is the package type of XC6122A641ER-G?
    - Answer: XC6122A641ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.