Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6122D634MR-G
Tingnan ang Detalye DataSheets

XC6122D634MR-G

Product Overview

Category

XC6122D634MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6122D634MR-G provides a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
  • Short-circuit protection: It safeguards against short circuits, preventing damage to the regulator and connected devices.

Package

XC6122D634MR-G is available in a small surface-mount package.

Essence

The essence of XC6122D634MR-G lies in its ability to provide reliable and stable voltage regulation for electronic circuits.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.3V
  • Maximum output current: 200mA
  • Dropout voltage: 150mV (at 100mA)
  • Quiescent current: 1μA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6122D634MR-G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: Maintains a constant output voltage despite variations in input voltage.
  • Low dropout voltage: Operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: Consumes minimal current when no load is connected, conserving power.
  • Thermal shutdown protection: Automatically shuts down to prevent damage from excessive heat.
  • Short-circuit protection: Safeguards against short circuits, protecting the regulator and connected devices.

Advantages and Disadvantages

Advantages

  • Provides stable voltage regulation for electronic circuits.
  • Efficient operation with low dropout voltage.
  • Low quiescent current consumption.
  • Built-in thermal shutdown and short-circuit protection.

Disadvantages

  • Limited maximum output current (200mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6122D634MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the output voltage to a reference voltage and adjusts the internal circuitry accordingly to maintain a constant output voltage.

Detailed Application Field Plans

XC6122D634MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D634MR-G include: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6204B332MR-G - XC6203B332MR-G

These models offer similar voltage regulation capabilities and may vary in terms of package size, maximum output current, or other specifications.

Word count: 431 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6122D634MR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6122D634MR-G in technical solutions:

  1. Q: What is XC6122D634MR-G? A: XC6122D634MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122D634MR-G? A: The operating voltage range of XC6122D634MR-G is from 0.6V to 6.0V.

  3. Q: What is the output type of XC6122D634MR-G? A: XC6122D634MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different functionalities.

  4. Q: What is the typical quiescent current consumption of XC6122D634MR-G? A: The typical quiescent current consumption of XC6122D634MR-G is around 1.0µA, making it suitable for low-power applications.

  5. Q: Can XC6122D634MR-G detect both overvoltage and undervoltage conditions? A: No, XC6122D634MR-G is specifically designed to detect undervoltage conditions only.

  6. Q: What is the detection voltage threshold of XC6122D634MR-G? A: The detection voltage threshold of XC6122D634MR-G is fixed at 6.34V.

  7. Q: How accurate is the voltage detection of XC6122D634MR-G? A: The accuracy of XC6122D634MR-G is typically ±2%.

  8. Q: Can XC6122D634MR-G be used in automotive applications? A: Yes, XC6122D634MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Q: Does XC6122D634MR-G have built-in hysteresis? A: Yes, XC6122D634MR-G has a built-in hysteresis of typically 0.1V, which helps to prevent false triggering due to voltage fluctuations.

  10. Q: What package does XC6122D634MR-G come in? A: XC6122D634MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements. It is always recommended to refer to the official documentation for accurate information.