Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6123D316MR-G
Tingnan ang Detalye DataSheets

XC6123D316MR-G

Product Overview

Category

XC6123D316MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123D316MR-G comes in a small surface-mount package.

Essence

The essence of XC6123D316MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The product is typically packaged in reels and the quantity per reel varies depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.16V
  • Output Current: Up to 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D316MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6123D316MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal protection enhance the reliability of the circuit.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6123D316MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6123D316MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D316MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 346 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6123D316MR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6123D316MR-G in technical solutions:

  1. Question: What is XC6123D316MR-G?
    - Answer: XC6123D316MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123D316MR-G?
    - Answer: The operating voltage range of XC6123D316MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6123D316MR-G detect voltage levels?
    - Answer: XC6123D316MR-G uses an internal voltage reference and a comparator to monitor the input voltage. When the input voltage exceeds or falls below a certain threshold, it triggers an output signal.

  4. Question: What is the typical accuracy of XC6123D316MR-G?
    - Answer: The typical accuracy of XC6123D316MR-G is ±1.5%.

  5. Question: Can XC6123D316MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123D316MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: Does XC6123D316MR-G have any built-in protection features?
    - Answer: Yes, XC6123D316MR-G has built-in overvoltage and undervoltage detection, which can help protect the connected circuitry from voltage spikes or drops.

  7. Question: What is the output configuration of XC6123D316MR-G?
    - Answer: XC6123D316MR-G has an open-drain output configuration, which allows for easy integration with other digital circuits.

  8. Question: Can XC6123D316MR-G be used in automotive applications?
    - Answer: Yes, XC6123D316MR-G is AEC-Q100 qualified and can be used in automotive applications where voltage monitoring is required.

  9. Question: What is the temperature range of XC6123D316MR-G?
    - Answer: The temperature range of XC6123D316MR-G is from -40°C to +85°C.

  10. Question: Are there any application notes or reference designs available for XC6123D316MR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website, which can help users understand and implement XC6123D316MR-G in their technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.