Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6123F528MR-G
Product Overview
Category
XC6123F528MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6123F528MR-G comes in a small surface-mount package.
Essence
The essence of XC6123F528MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.
Packaging/Quantity
It is typically packaged in reels and available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.8V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 40μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: Provides a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: Safeguards the circuit by limiting the current flow.
- Thermal shutdown protection: Prevents overheating by shutting down the regulator when the temperature exceeds a certain threshold.
- Low dropout voltage: Allows the regulator to operate even when the input voltage is close to the desired output voltage.
Advantages and Disadvantages
Advantages
- Small form factor, suitable for space-constrained applications.
- High efficiency, minimizing power loss.
- Wide input voltage range, accommodating various power sources.
- Overcurrent and thermal protection ensure the safety of the circuit.
Disadvantages
- Limited output current capacity (150mA).
- Fixed output voltage may not be suitable for all applications.
Working Principles
XC6123F528MR-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage, compensating for changes in input voltage and load conditions. The internal circuitry adjusts the resistance to regulate the output voltage within the specified range.
Detailed Application Field Plans
XC6123F528MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Industrial control systems
Detailed and Complete Alternative Models
- XC6123F528MR-G-XX: Similar to XC6123F528MR-G with adjustable output voltage.
- XC6123F628MR-G: Higher output current capacity (250mA) variant.
- XC6123F518MR-G: Lower output voltage (1.8V) variant.
These alternative models provide flexibility to cater to different voltage requirements and output current demands.
In conclusion, XC6123F528MR-G is a compact and efficient voltage regulator that offers stable voltage output for various electronic applications. Its wide input voltage range, overcurrent protection, and thermal shutdown features make it a reliable choice for designers. However, its limited output current capacity and fixed output voltage should be considered when selecting the appropriate model for specific applications.
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6123F528MR-G sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of XC6123F528MR-G in technical solutions:
Q: What is XC6123F528MR-G? A: XC6123F528MR-G is a specific model of voltage regulator IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to regulate voltage in various electronic applications.
Q: What is the input voltage range for XC6123F528MR-G? A: The input voltage range for XC6123F528MR-G is typically between 2.5V and 6.0V.
Q: What is the output voltage of XC6123F528MR-G? A: The output voltage of XC6123F528MR-G is fixed at 5.2V.
Q: What is the maximum output current of XC6123F528MR-G? A: The maximum output current of XC6123F528MR-G is 200mA.
Q: Can XC6123F528MR-G be used in battery-powered applications? A: Yes, XC6123F528MR-G can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.
Q: Is XC6123F528MR-G suitable for automotive applications? A: Yes, XC6123F528MR-G is suitable for automotive applications as it meets the required automotive standards and has a wide operating temperature range.
Q: Does XC6123F528MR-G have built-in protection features? A: Yes, XC6123F528MR-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current blocking.
Q: Can XC6123F528MR-G be used in space-constrained designs? A: Yes, XC6123F528MR-G is available in a small SOT-25 package, making it suitable for space-constrained designs.
Q: What are the typical applications of XC6123F528MR-G? A: XC6123F528MR-G can be used in various applications such as portable devices, IoT (Internet of Things) devices, automotive electronics, and industrial equipment.
Q: Are there any evaluation boards or reference designs available for XC6123F528MR-G? A: Yes, Torex Semiconductor provides evaluation boards and reference designs for XC6123F528MR-G to help with the development and integration process.
Please note that the answers provided here are general and may vary depending on specific requirements and datasheet specifications. It is always recommended to refer to the official documentation and consult with technical experts for accurate information.