Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6124E740MR-G
Tingnan ang Detalye DataSheets

XC6124E740MR-G

Product Overview

Category

XC6124E740MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124E740MR-G comes in a small surface-mount package.

Essence

The essence of XC6124E740MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6124E740MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E740MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124E740MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

XC6124E740MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6124E740MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E740MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models offer similar functionality and specifications, providing flexibility in choosing the most suitable voltage regulator for specific applications.

Note: The content provided above is approximately 350 words. Additional information or details can be added to meet the required word count of 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6124E740MR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6124E740MR-G in technical solutions:

  1. Question: What is XC6124E740MR-G?
    - Answer: XC6124E740MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124E740MR-G?
    - Answer: The operating voltage range of XC6124E740MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124E740MR-G detect voltage levels?
    - Answer: XC6124E740MR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

  4. Question: What is the output type of XC6124E740MR-G?
    - Answer: XC6124E740MR-G has an open-drain output, which means it can sink current but cannot source current. This allows for flexibility in connecting to different types of circuits.

  5. Question: What is the typical quiescent current consumption of XC6124E740MR-G?
    - Answer: The typical quiescent current consumption of XC6124E740MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124E740MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124E740MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  7. Question: What is the hysteresis feature of XC6124E740MR-G?
    - Answer: XC6124E740MR-G has a built-in hysteresis function, which prevents the output from oscillating rapidly when the input voltage is near the threshold level. This helps to provide stable and reliable voltage monitoring.

  8. Question: Can XC6124E740MR-G be used in automotive applications?
    - Answer: Yes, XC6124E740MR-G is suitable for automotive applications as it can operate within the specified temperature range (-40°C to +105°C) and has a high ESD (electrostatic discharge) tolerance.

  9. Question: How is XC6124E740MR-G typically connected in a circuit?
    - Answer: XC6124E740MR-G requires an external resistor to set the voltage threshold. The input voltage is connected to the VIN pin, and the output signal is obtained from the OUT pin.

  10. Question: Is XC6124E740MR-G available in different package options?
    - Answer: Yes, XC6124E740MR-G is available in various package options, including SOT-25, SOT-89, and USP-6B. The specific package option should be selected based on the requirements of the application.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.