Toshiba Semiconductor and Storage
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
RFM12U7X(TE12L,Q)
Tingnan ang Detalye DataSheets

RFM12U7X(TE12L,Q) Encyclopedia Entry

Product Overview

Category

The RFM12U7X(TE12L,Q) belongs to the category of RF (radio frequency) modules.

Use

It is used for wireless communication and data transmission in various electronic devices.

Characteristics

  • Low power consumption
  • Long-range communication capability
  • Compact package size
  • High reliability

Package

The RFM12U7X(TE12L,Q) is typically available in a small surface-mount package.

Essence

The essence of the RFM12U7X(TE12L,Q) lies in its ability to provide reliable wireless communication in a compact form factor.

Packaging/Quantity

The module is usually supplied in tape and reel packaging, with varying quantities depending on the supplier.

Specifications

  • Frequency Range: 433MHz
  • Operating Voltage: 2.2V - 3.8V
  • Transmit Power: Up to 10dBm
  • Receiver Sensitivity: -110dBm
  • Interface: SPI (Serial Peripheral Interface)

Detailed Pin Configuration

The RFM12U7X(TE12L,Q) module typically has the following pin configuration: 1. VCC 2. GND 3. SCK (Serial Clock) 4. SDI (Serial Data Input) 5. SDO (Serial Data Output) 6. NSEL (Chip Select) 7. IRQ (Interrupt Request) 8. ANT (Antenna)

Functional Features

  • Low power sleep modes for energy efficiency
  • Configurable transmit power levels
  • Integrated voltage regulator for wide operating voltage range
  • Packet handling and error detection features

Advantages and Disadvantages

Advantages

  • Long-range communication capability
  • Low power consumption
  • Compact form factor
  • Reliable data transmission

Disadvantages

  • Limited data rate compared to some higher frequency modules
  • Susceptibility to interference in certain environments

Working Principles

The RFM12U7X(TE12L,Q) operates based on the principles of RF communication, utilizing modulation techniques to transmit and receive data wirelessly. It employs a transceiver architecture to enable bidirectional communication between devices.

Detailed Application Field Plans

The RFM12U7X(TE12L,Q) is commonly used in applications such as: - Remote sensor networks - Home automation systems - Industrial control and monitoring - Wireless telemetry systems

Detailed and Complete Alternative Models

Some alternative models to the RFM12U7X(TE12L,Q) include: - RFM22B - NRF24L01+ - CC1101 - SX1278

In conclusion, the RFM12U7X(TE12L,Q) offers a reliable and efficient solution for wireless communication in various electronic applications, with its compact design and low power consumption making it suitable for battery-powered devices.

Word count: 411

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng RFM12U7X(TE12L,Q) sa mga teknikal na solusyon

  1. What is the RFM12U7X(TE12L,Q) module used for?

    • The RFM12U7X(TE12L,Q) module is commonly used for wireless communication in technical solutions, such as remote monitoring, telemetry, and control applications.

  2. What is the operating frequency range of the RFM12U7X(TE12L,Q) module?

    • The RFM12U7X(TE12L,Q) module operates in the 433MHz ISM band, making it suitable for various wireless applications.

  3. What is the maximum transmission range of the RFM12U7X(TE12L,Q) module?

    • The RFM12U7X(TE12L,Q) module can achieve a maximum transmission range of up to several hundred meters in open space, depending on the surrounding environment and antenna design.

  4. How can I interface with the RFM12U7X(TE12L,Q) module?

    • The RFM12U7X(TE12L,Q) module typically interfaces with microcontrollers or other embedded systems using standard communication protocols such as SPI or UART.

  5. What are the power requirements for the RFM12U7X(TE12L,Q) module?

    • The RFM12U7X(TE12L,Q) module typically operates at a supply voltage of 3.3V and has low power consumption, making it suitable for battery-powered applications.

  6. Can the RFM12U7X(TE12L,Q) module be used for bidirectional communication?

    • Yes, the RFM12U7X(TE12L,Q) module supports bidirectional communication, allowing for both data transmission and reception.

  7. Does the RFM12U7X(TE12L,Q) module support encryption and security features?

    • The RFM12U7X(TE12L,Q) module may offer encryption and security features to ensure the confidentiality and integrity of transmitted data, depending on the specific configuration and firmware.

  8. Is the RFM12U7X(TE12L,Q) module suitable for use in industrial environments?

    • Yes, the RFM12U7X(TE12L,Q) module is designed to meet the requirements for industrial applications and can operate reliably in harsh environmental conditions.

  9. What type of antennas are compatible with the RFM12U7X(TE12L,Q) module?

    • The RFM12U7X(TE12L,Q) module is compatible with various types of antennas, including wire antennas, PCB antennas, and external antennas, allowing for flexibility in design and implementation.

  10. Are there any regulatory considerations when using the RFM12U7X(TE12L,Q) module?

    • When using the RFM12U7X(TE12L,Q) module, it is important to comply with local regulations regarding radio frequency emissions and usage to ensure legal operation and avoid interference with other devices.