Tingnan ang mga detalye para sa mga detalye ng produkto.
NTHS0805N02N6001KP
Product Overview
Category
The NTHS0805N02N6001KP belongs to the category of surface mount resistors.
Use
It is used as a precision thin film resistor for various electronic applications.
Characteristics
- Precision thin film technology
- High stability and reliability
- Small package size
- Low temperature coefficient
Package
The NTHS0805N02N6001KP is typically available in tape and reel packaging.
Essence
The essence of this product lies in its ability to provide precise resistance values in a compact form factor.
Packaging/Quantity
The NTHS0805N02N6001KP is usually packaged in reels containing a specific quantity, such as 5000 units per reel.
Specifications
- Resistance: 6.001 kΩ
- Tolerance: ±0.02%
- Power Rating: 125 mW
- Temperature Coefficient: ±5 ppm/°C
Detailed Pin Configuration
The NTHS0805N02N6001KP has two terminals for soldering onto the circuit board. The pin configuration is standard for an 0805 package.
Functional Features
- Precise resistance value
- High stability over temperature and time
- Low noise and voltage coefficient
Advantages
- Excellent precision and stability
- Compact size for space-constrained designs
- Low temperature coefficient ensures minimal drift
Disadvantages
- Higher cost compared to standard carbon film resistors
- Sensitive to excessive heat during soldering
Working Principles
The NTHS0805N02N6001KP utilizes thin film technology to achieve precise resistance values. The thin film is deposited on a ceramic substrate and trimmed to the desired resistance using laser trimming techniques.
Detailed Application Field Plans
The NTHS0805N02N6001KP is suitable for use in precision analog circuits, sensor interfaces, and high-accuracy measurement equipment. It is also commonly employed in medical devices, automotive electronics, and aerospace applications where stability and accuracy are critical.
Detailed and Complete Alternative Models
- NTHS0805N01N1002KP (1.002 kΩ, ±0.01%)
- NTHS0805N05N2003KP (5.203 kΩ, ±0.05%)
- NTHS0805N10N5004KP (10.504 kΩ, ±0.1%)
This completes the entry for the NTHS0805N02N6001KP, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng NTHS0805N02N6001KP sa mga teknikal na solusyon
What is the maximum voltage rating for NTHS0805N02N6001KP?
- The maximum voltage rating for NTHS0805N02N6001KP is 50V.
What is the power rating of NTHS0805N02N6001KP?
- The power rating of NTHS0805N02N6001KP is 125mW.
What is the resistance value of NTHS0805N02N6001KP?
- The resistance value of NTHS0805N02N6001KP is 6 kΩ.
Is NTHS0805N02N6001KP suitable for high-frequency applications?
- Yes, NTHS0805N02N6001KP is suitable for high-frequency applications due to its low parasitic inductance and capacitance.
Can NTHS0805N02N6001KP be used in automotive electronics?
- Yes, NTHS0805N02N6001KP is suitable for use in automotive electronics as it meets automotive industry standards for reliability and performance.
What is the temperature coefficient of resistance (TCR) for NTHS0805N02N6001KP?
- The TCR for NTHS0805N02N6001KP is ±100ppm/°C.
Does NTHS0805N02N6001KP have RoHS compliance?
- Yes, NTHS0805N02N6001KP is compliant with RoHS regulations.
What are the typical applications for NTHS0805N02N6001KP?
- Typical applications for NTHS0805N02N6001KP include voltage regulation, current limiting, and sensor signal conditioning.
Is NTHS0805N02N6001KP suitable for use in precision instrumentation?
- Yes, NTHS0805N02N6001KP is suitable for use in precision instrumentation due to its tight tolerance and stability.
What are the recommended soldering profiles for NTHS0805N02N6001KP?
- The recommended soldering profiles for NTHS0805N02N6001KP include reflow soldering with peak temperature not exceeding 260°C and hand soldering with a maximum soldering iron tip temperature of 350°C.