Tingnan ang mga detalye para sa mga detalye ng produkto.
VS-2KBB100R
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact size
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Typically sold in packs of 10
Specifications
- Input Voltage: 4.5V to 24V
- Output Voltage: 1.25V to 20V
- Maximum Output Current: 1A
- Dropout Voltage: 0.3V at 1A
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- Vout (Output Voltage)
- GND (Ground)
Functional Features
- High accuracy and stability
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
Advantages and Disadvantages
Advantages: - Precise voltage regulation - Wide input voltage range - Compact size
Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives
Working Principles
The VS-2KBB100R operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite changes in input voltage or load.
Detailed Application Field Plans
The VS-2KBB100R is suitable for various applications requiring a stable voltage supply, such as: - Battery-powered devices - Embedded systems - Automotive electronics
Detailed and Complete Alternative Models
- LM317: Similar voltage regulator with adjustable output
- L7805: Fixed 5V voltage regulator with higher output current capability
In conclusion, the VS-2KBB100R is a reliable voltage regulator with high precision and stability, making it suitable for a wide range of electronic applications.
Word count: 272
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng VS-2KBB100R sa mga teknikal na solusyon
What is VS-2KBB100R?
- VS-2KBB100R is a high-performance epoxy adhesive and sealant commonly used in technical solutions for bonding, sealing, and potting applications.
What are the key features of VS-2KBB100R?
- VS-2KBB100R offers excellent adhesion to a wide variety of substrates, high chemical resistance, and good thermal stability, making it suitable for demanding technical applications.
How do I apply VS-2KBB100R for bonding applications?
- Clean the surfaces to be bonded, mix the two components of VS-2KBB100R thoroughly, and apply the adhesive to the prepared surfaces. Clamp the parts together until the adhesive sets.
Can VS-2KBB100R be used for sealing applications?
- Yes, VS-2KBB100R can be used for sealing applications to provide a durable and long-lasting seal against moisture, chemicals, and environmental factors.
Is VS-2KBB100R suitable for potting electronic components?
- Absolutely, VS-2KBB100R is an ideal choice for potting electronic components due to its excellent electrical insulation properties and resistance to vibration and thermal cycling.
What is the recommended curing time for VS-2KBB100R?
- The curing time for VS-2KBB100R can vary based on temperature and humidity, but typically, it achieves handling strength within 4-6 hours and full cure within 24 hours.
Does VS-2KBB100R require any surface preparation before application?
- It is recommended to clean and degrease the surfaces before applying VS-2KBB100R to ensure maximum adhesion and performance.
Can VS-2KBB100R withstand exposure to harsh chemicals?
- Yes, VS-2KBB100R demonstrates high chemical resistance, making it suitable for applications where exposure to various chemicals is expected.
What temperature range can VS-2KBB100R withstand?
- VS-2KBB100R exhibits good thermal stability and can withstand temperatures ranging from -40°C to 150°C, making it suitable for diverse technical solutions.
Is VS-2KBB100R suitable for outdoor applications?
- Yes, VS-2KBB100R is UV resistant and weatherproof, making it suitable for outdoor applications requiring long-term durability and performance.