Vishay Semiconductor Diodes Division
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
VS-82CNQ030APBF
Tingnan ang Detalye DataSheets

VS-82CNQ030APBF

Product Category: Power Diode

Basic Information Overview: - Category: Power diode - Use: Rectification in power supply circuits - Characteristics: High current carrying capability, low forward voltage drop - Package: TO-263AB - Essence: Efficient rectification of high-power AC to DC conversion - Packaging/Quantity: Tape & Reel, 800 units per reel

Specifications: - Voltage Rating: 30V - Current Rating: 80A - Forward Voltage Drop: 0.55V at 40A - Reverse Recovery Time: 35ns

Detailed Pin Configuration: - Pin 1: Anode - Pin 2: Cathode - Pin 3: Not connected (NC)

Functional Features: - High current capability - Low forward voltage drop - Fast reverse recovery time - Low thermal resistance

Advantages and Disadvantages: - Advantages: - High current carrying capacity - Low forward voltage drop - Fast recovery time - Low thermal resistance - Disadvantages: - Higher cost compared to standard diodes - Larger package size

Working Principles: The VS-82CNQ030APBF operates on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the reverse direction. When a positive voltage is applied to the anode with respect to the cathode, the diode conducts, allowing current to flow through it.

Detailed Application Field Plans: - Switching power supplies - Motor drives - Inverters - Welding equipment - Battery chargers

Detailed and Complete Alternative Models: - 1. VS-82CNQ045APBF: 45V, 80A, TO-263AB package - 2. VS-82CNQ060APBF: 60V, 80A, TO-263AB package - 3. VS-82CNQ080APBF: 80V, 80A, TO-263AB package

This comprehensive entry provides detailed information about the VS-82CNQ030APBF power diode, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng VS-82CNQ030APBF sa mga teknikal na solusyon

  1. What is the maximum voltage rating of VS-82CNQ030APBF?

    • The maximum voltage rating of VS-82CNQ030APBF is 30V.

  2. What is the maximum continuous forward current of VS-82CNQ030APBF?

    • The maximum continuous forward current of VS-82CNQ030APBF is 80A.

  3. What is the typical forward voltage drop of VS-82CNQ030APBF at a specific current?

    • The typical forward voltage drop of VS-82CNQ030APBF varies with current, and it can be found in the datasheet for specific operating conditions.

  4. What is the reverse recovery time of VS-82CNQ030APBF?

    • The reverse recovery time of VS-82CNQ030APBF is typically specified in the datasheet and depends on the operating conditions.

  5. Can VS-82CNQ030APBF be used in parallel to increase current handling capability?

    • Yes, VS-82CNQ030APBF can be used in parallel to increase current handling capability, but proper thermal management and current sharing considerations are essential.

  6. What are the typical applications of VS-82CNQ030APBF in technical solutions?

    • VS-82CNQ030APBF is commonly used in power supplies, motor drives, and other high-current switching applications.

  7. Does VS-82CNQ030APBF require a heatsink for operation?

    • The need for a heatsink depends on the application and the operating conditions. It's recommended to consult the datasheet and consider thermal management requirements.

  8. What is the junction temperature range for VS-82CNQ030APBF?

    • The junction temperature range for VS-82CNQ030APBF is typically specified in the datasheet and should be carefully considered for reliable operation.

  9. Is VS-82CNQ030APBF suitable for automotive or industrial applications?

    • Yes, VS-82CNQ030APBF is suitable for automotive and industrial applications, provided that it meets the specific requirements and standards for those applications.

  10. Are there any known reliability issues or failure modes associated with VS-82CNQ030APBF?

    • Reliability issues and failure modes should be considered based on the application and operating conditions. It's important to follow recommended design guidelines and stress limits outlined in the datasheet to ensure reliable operation.