Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SIHF22N60E-GE3

SIHF22N60E-GE3

Product Category

The SIHF22N60E-GE3 belongs to the category of power MOSFETs.

Basic Information Overview

  • Use: The SIHF22N60E-GE3 is used as a power semiconductor device for high-frequency switching applications.
  • Characteristics: It exhibits low on-state resistance, high switching speed, and low gate charge, making it suitable for efficient power conversion.
  • Package: The SIHF22N60E-GE3 is typically available in a TO-220 Full-Pak package.
  • Essence: This MOSFET is designed to provide high performance and reliability in power electronics applications.
  • Packaging/Quantity: It is commonly packaged in reels or tubes with varying quantities based on customer requirements.

Specifications

  • Voltage Rating: 600V
  • Current Rating: 22A
  • RDS(ON): 0.22Ω
  • Gate-Source Voltage (Max): ±20V
  • Continuous Drain Current (TC=25°C): 22A
  • Pulsed Drain Current: 88A
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The SIHF22N60E-GE3 features a standard three-pin configuration: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High Frequency Switching Capability
  • Low On-State Resistance
  • Fast Switching Speed
  • Low Gate Charge

Advantages

  • Enhanced Power Efficiency
  • Reduced Heat Dissipation
  • Improved System Reliability
  • Suitable for High-Frequency Applications

Disadvantages

  • Higher Cost Compared to Conventional MOSFETs
  • Sensitivity to Overvoltage Conditions

Working Principles

The SIHF22N60E-GE3 operates based on the principle of field-effect control, where the voltage applied to the gate terminal modulates the conductivity between the drain and source terminals, allowing for efficient power switching.

Detailed Application Field Plans

The SIHF22N60E-GE3 is widely utilized in various applications including: - Switch Mode Power Supplies - Motor Drives - Inverters - Uninterruptible Power Supplies (UPS) - Solar Inverters - Induction Heating

Detailed and Complete Alternative Models

  • Infineon IPP60R190E6
  • STMicroelectronics STW45NM50FD
  • ON Semiconductor FDPF33N25T

In conclusion, the SIHF22N60E-GE3 power MOSFET offers high-performance characteristics suitable for a wide range of power electronics applications, despite its higher cost and sensitivity to overvoltage conditions. Its functional features and advantages make it a preferred choice for high-frequency switching applications, while alternative models provide flexibility in design and application.

Word count: 398

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SIHF22N60E-GE3 sa mga teknikal na solusyon

Sure, here are 10 common questions and answers related to the application of SIHF22N60E-GE3 in technical solutions:

  1. What is the maximum drain current of SIHF22N60E-GE3?

    • The maximum drain current is 22A.
  2. What is the voltage rating of SIHF22N60E-GE3?

    • The voltage rating is 600V.
  3. Can SIHF22N60E-GE3 be used in high-frequency applications?

    • Yes, it is suitable for high-frequency applications due to its fast switching characteristics.
  4. Is SIHF22N60E-GE3 suitable for use in power supplies?

    • Yes, it is commonly used in power supply applications due to its high current and voltage ratings.
  5. What is the typical on-resistance of SIHF22N60E-GE3?

    • The typical on-resistance is 0.16 ohms.
  6. Does SIHF22N60E-GE3 require a heat sink for thermal management?

    • It is recommended to use a heat sink for efficient thermal management, especially in high-power applications.
  7. Can SIHF22N60E-GE3 be used in motor control applications?

    • Yes, it is suitable for motor control applications due to its high current handling capability.
  8. What is the gate threshold voltage of SIHF22N60E-GE3?

    • The gate threshold voltage typically ranges from 2V to 4V.
  9. Is SIHF22N60E-GE3 suitable for automotive applications?

    • Yes, it is commonly used in automotive systems such as electric vehicle powertrains and battery management.
  10. What are the typical operating temperature range and storage temperature range for SIHF22N60E-GE3?

    • The typical operating temperature range is -55°C to 150°C, and the storage temperature range is -55°C to 175°C.

These questions and answers cover various aspects of the application of SIHF22N60E-GE3 in technical solutions. If you have more specific questions, feel free to ask!