WeEn Semiconductors
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
PHD13003C,412
Tingnan ang Detalye DataSheets

PHD13003C,412

Product Overview

Category

The PHD13003C,412 belongs to the category of power transistors.

Use

It is commonly used in electronic circuits for switching and amplification purposes.

Characteristics

  • High voltage capability
  • Low spread of dynamic parameters
  • Very high switching speed

Package

The PHD13003C,412 comes in a TO-126 package.

Essence

This product is essential for power management in various electronic devices and systems.

Packaging/Quantity

It is typically packaged in reels or tubes and is available in varying quantities depending on the supplier.

Specifications

  • Maximum Collector-Emitter Voltage: 600V
  • Maximum Collector Current: 1.5A
  • Power Dissipation: 40W
  • Transition Frequency: 4MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The PHD13003C,412 has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage capability allows for use in various applications
  • Low spread of dynamic parameters ensures consistent performance
  • Very high switching speed enables rapid response in electronic circuits

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Consistent performance
  • Rapid switching speed

Disadvantages

  • Limited maximum collector current compared to some other power transistors
  • Relatively lower power dissipation compared to higher-rated transistors

Working Principles

The PHD13003C,412 operates based on the principles of semiconductor physics, utilizing its specific material properties to control the flow of current through the collector and emitter terminals.

Detailed Application Field Plans

The PHD13003C,412 is commonly used in the following applications: - Switching power supplies - Electronic ballasts - LED lighting drivers - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the PHD13003C,412 include: - MJE13003 - 2SC5200 - TIP31C - BD139

In conclusion, the PHD13003C,412 is a versatile power transistor with high voltage capability, making it suitable for various electronic applications. Its characteristics, specifications, and application field plans make it an important component in power management and amplification circuits.

[Word count: 324]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng PHD13003C,412 sa mga teknikal na solusyon

  1. What is the PHD13003C,412 used for?

    • The PHD13003C,412 is a high voltage NPN transistor commonly used in electronic circuits for switching and amplification applications.

  2. What are the typical operating conditions for PHD13003C,412?

    • The PHD13003C,412 typically operates at a maximum collector-emitter voltage of 600V and a maximum collector current of 4A.

  3. How do I determine the pinout of PHD13003C,412?

    • The pinout of the PHD13003C,412 can be determined by referring to the datasheet provided by the manufacturer. Typically, the pins are labeled as collector (C), base (B), and emitter (E).

  4. What are the common applications of PHD13003C,412 in technical solutions?

    • The PHD13003C,412 is commonly used in power supply circuits, electronic ballasts, and general purpose switching applications.

  5. What are the key electrical characteristics of PHD13003C,412?

    • The key electrical characteristics include its maximum voltage and current ratings, gain (hFE), and frequency response.

  6. How do I ensure proper heat dissipation for PHD13003C,412 in my design?

    • Proper heat sinking and thermal management techniques should be employed to ensure that the PHD13003C,412 operates within its specified temperature limits.

  7. Can PHD13003C,412 be used in high-frequency applications?

    • While PHD13003C,412 has a moderate frequency response, it may not be suitable for very high-frequency applications due to its internal capacitances and transit times.

  8. Are there any recommended driver circuits for PHD13003C,412?

    • Depending on the specific application, appropriate driver circuits such as push-pull or complementary configurations may be used to drive the PHD13003C,412 effectively.

  9. What are the considerations for protecting PHD13003C,412 from overvoltage and overcurrent conditions?

    • Overvoltage protection can be implemented using clamping diodes or transient voltage suppressors, while overcurrent protection can be achieved using current-limiting resistors or circuit breakers.

  10. Where can I find reliable application notes and reference designs for PHD13003C,412?

    • Manufacturers' websites, technical forums, and application notes from semiconductor companies are good sources for finding reliable application information and reference designs for PHD13003C,412.