Tingnan ang mga detalye para sa mga detalye ng produkto.
XC17S10PD8I
Product Overview
Category
XC17S10PD8I belongs to the category of programmable logic devices (PLDs).
Use
It is primarily used for digital circuit design and implementation.
Characteristics
- Programmable: XC17S10PD8I can be programmed to perform specific functions.
- High-speed operation: It offers fast processing capabilities.
- Versatile: It can be used in various applications due to its programmability.
- Compact package: The device comes in a small form factor, making it suitable for space-constrained designs.
Package
XC17S10PD8I is available in a PDIP-8 package.
Essence
The essence of XC17S10PD8I lies in its ability to provide flexible and customizable digital circuit functionality.
Packaging/Quantity
The device is typically packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Logic capacity: 10 macrocells
- Operating voltage: 3.3V
- Maximum operating frequency: 50 MHz
- Input/output pins: 8
- Programming technology: Non-volatile
Detailed Pin Configuration
- VCC: Power supply voltage input
- GND: Ground reference
- I/O0: Input/output pin 0
- I/O1: Input/output pin 1
- I/O2: Input/output pin 2
- I/O3: Input/output pin 3
- I/O4: Input/output pin 4
- I/O5: Input/output pin 5
Functional Features
- Programmability: XC17S10PD8I can be programmed using specialized software tools.
- Macrocell architecture: It consists of multiple macrocells that can be configured to perform different functions.
- Fast propagation delay: The device offers low latency for efficient signal processing.
- In-system reprogrammability: It can be reprogrammed while in operation, allowing for dynamic changes to the circuit functionality.
Advantages and Disadvantages
Advantages
- Flexibility: XC17S10PD8I allows for custom logic design without the need for physical component changes.
- Cost-effective: It eliminates the need for dedicated hardware components, reducing overall costs.
- Time-saving: Programming the device is faster than designing and manufacturing custom circuits.
Disadvantages
- Limited capacity: The logic capacity of XC17S10PD8I may not be sufficient for complex designs.
- Non-volatile programming: Once programmed, the device retains its configuration, which can be a disadvantage if frequent changes are required.
Working Principles
XC17S10PD8I operates based on the principles of programmable logic. It consists of configurable logic blocks (CLBs) that can be interconnected to create desired digital circuits. The device is programmed using a hardware description language (HDL) or a schematic entry tool. Upon programming, the configuration data is stored in non-volatile memory within the device, allowing it to retain the programmed functionality even after power is removed.
Detailed Application Field Plans
XC17S10PD8I finds applications in various fields, including: 1. Industrial automation: It can be used for controlling and monitoring processes in manufacturing plants. 2. Communication systems: XC17S10PD8I enables the implementation of custom protocols and signal processing algorithms. 3. Automotive electronics: It can be utilized in vehicle control systems and advanced driver assistance systems (ADAS). 4. Consumer electronics: The device can be integrated into smart home devices, gaming consoles, and multimedia systems.
Detailed and Complete Alternative Models
- XC17S10PD8C: Similar to XC17S10PD8I but available in a different package (Ceramic DIP-8).
- XC17S10PD8E: Enhanced version with increased logic capacity and additional features.
- XC17S20PD8I: Higher-capacity variant with 20 macrocells.
These alternative models offer similar functionality to XC17S10PD8I but may differ in terms of package, capacity, or additional features.
Word count: 524 words
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC17S10PD8I sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of XC17S10PD8I in technical solutions:
Q: What is XC17S10PD8I? A: XC17S10PD8I is a specific model of programmable logic device (PLD) manufactured by Xilinx.
Q: What are the key features of XC17S10PD8I? A: XC17S10PD8I offers 10,000 usable gates, 10 ns maximum propagation delay, and operates at a voltage range of 4.5V to 5.5V.
Q: How can XC17S10PD8I be used in technical solutions? A: XC17S10PD8I can be used for various applications such as digital circuit design, prototyping, system integration, and control logic implementation.
Q: What programming languages are supported by XC17S10PD8I? A: XC17S10PD8I supports VHDL (Very High-Speed Integrated Circuit Hardware Description Language) and Verilog HDL (Hardware Description Language).
Q: Can XC17S10PD8I be reprogrammed after it has been programmed once? A: No, XC17S10PD8I is a one-time programmable (OTP) device, meaning it cannot be reprogrammed once it has been programmed.
Q: What is the power consumption of XC17S10PD8I? A: The power consumption of XC17S10PD8I depends on the operating frequency and the complexity of the design implemented. It is typically low compared to other PLDs.
Q: Is XC17S10PD8I suitable for high-speed applications? A: Yes, XC17S10PD8I has a maximum propagation delay of 10 ns, making it suitable for high-speed applications.
Q: Can XC17S10PD8I interface with other components or devices? A: Yes, XC17S10PD8I can interface with other components or devices through its input/output pins and support various communication protocols.
Q: What is the temperature range in which XC17S10PD8I can operate? A: XC17S10PD8I can operate within a temperature range of -40°C to +85°C.
Q: Are there any development tools available for programming XC17S10PD8I? A: Yes, Xilinx provides development tools like Xilinx ISE Design Suite that can be used to program and configure XC17S10PD8I.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases.