Bumili ng onsemi (Ansemi) MC100EP210SMNG 5 differential, dual LVDS, 2.5 V

onsemi (Ansemi)

Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.

MC100EP210SMNG

5 differential, dual LVDS, 2.5 V

Numero ng Bahagi

MC100EP210SMNG

Kategorya

RTC/Clock Chip > Clock Buffer, Driver

Manufacturer/Brand

onsemi (Ansemi)

Encapsulation

QFN-32-EP(5x5)

Pag-iimpake

Tube

Bilang ng mga pakete

Paglalarawan

The MC100EP210S is a low skew 1:5 dual differential driver designed with LVDS clock distribution in mind. The LVDS or LVPECL input signal is differential and the signal is distributed to five identical differential LVDS outputs. The EP210S specifically guarantees low output-to-output skew. Optimized design, layout, and handling minimize skew within the device and from device to device. Two internal 50 ohm resistors are provided across the input. For LVDS input, the VTA and VTB pins should be disconnected. For LVPECL input, VTA and VTB pins should be connected to VTT (VCC-2.0 V) supply. Designers can take full advantage of the performance of the EP210S to distribute low-skew LVDS clocks on a chassis or main board. Special consideration should be given to differential inputs to prevent instability under no-signal conditions.

Humiling ng Quote

Pakikumpleto ang lahat ng kinakailangang field at i-click ang "Isumite", makikipag-ugnayan kami sa iyo sa loob ng 12 oras sa pamamagitan ng email. Kung mayroon kang anumang problema, mangyaring mag-iwan ng mga mensahe o email sa [email protected], tutugon kami sa lalong madaling panahon.

Sa Stock 80598 PCS

Impormasyon sa Pakikipag-ugnayan